Raymarine forum / Raymarine Forums / Multifunction Displays v / [CA] 50/200 as well as Chirp via a second Axiom?

Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[CA] 50/200 as well as Chirp via a second Axiom?
03-22-18, 09:36 AM
Post: #2
Chuck - Raymarine - Moderator Offline
Administrator
*******
 		Posts: 14,319
Joined: Oct 2014
Reputation: 43
RE: [CA] 50/200 as well as Chirp via a second Axiom?
Welcome to the Raymarine Forum JPA,

Q. If I were to connect my B60 transducer to a properly networked Axiom 7 DV through the appropriate adapter cable, would B60 data as well as RV-100 Data be available through both MFDs?
A. Yes. Should the B60 transducer's plug have been mated directly to the DS500X without using a adapter, then this transducer may then be adapted via the A80484 Adapter for use with an Axiom DV MFD. When networked to one another via an Ethernet network, these MFDs will share all resources and data.
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
RE: [CA] 50/200 as well as Chirp via a second Axiom? - Chuck - Raymarine - Moderator - 03-22-18 09:36 AM

Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us | Raymarine forum | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication