Raymarine forum / Raymarine Forums / Multifunction Displays v / (DG) Adding E120 to Seatalkng Netwrok?

Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
(DG) Adding E120 to Seatalkng Netwrok?
04-03-18, 07:17 AM (This post was last modified: 04-03-18 07:24 AM by Mark G - Raymarine UK.)
Post: #10
Mark G - Raymarine UK Offline
(Administrator)
*******
 		Posts: 4
Joined: Nov 2016
Reputation: 0
RE: (DG) Adding E120 to Seatalkng Netwrok?
Hi Jeffg,

The Seatalk pin out is as per the attached image, one things you can check is the Seatalk return wire on this connector is the "Black Wire" not the bare Screen wire.

Also the E120 has very limited power on the seatalk bus, so you may need to introduce a 12v supply to the Seatalk bus and disconnect the Red wire from your E120.

[Image: attachment.php?aid=1736]

Kind Regards


Attached File(s) Thumbnail(s)
   
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
RE: (DG) Adding E120 to Seatalkng Netwrok? - Mark G - Raymarine UK - 04-03-18 07:17 AM

Forum Jump:


User(s) browsing this thread: 3 Guest(s)

Contact Us | Raymarine forum | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication