Raymarine forum / Raymarine Forums / Multifunction Displays v / (DG) Adding E120 to Seatalkng Netwrok?

Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
(DG) Adding E120 to Seatalkng Netwrok?
04-05-18, 03:34 AM (This post was last modified: 04-06-18 08:17 AM by Chuck - Raymarine - Moderator.)
Post: #12
Mark G - Raymarine UK Offline
(Administrator)
*******
 		Posts: 4
Joined: Nov 2016
Reputation: 0
RE: [MG]Adding E120 to Seatalkng Netwrok?
Hi Jeff,

Yes, the SPX10 will be able to power the Seatalk bus, if you are going to power it from a different 12-volt supply, you will need to disconnect the Red wire from the Seatalk port on the SPX 10, and just leave the Yellow and screen (Grey) wires connected.

Regards
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
RE: [MG]Adding E120 to Seatalkng Netwrok? - Mark G - Raymarine UK - 04-05-18 03:34 AM

Forum Jump:


User(s) browsing this thread: 3 Guest(s)

Contact Us | Raymarine forum | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication