The following warnings occurred:
Warning [2] count(): Parameter must be an array or an object that implements Countable - Line: 802 - File: showthread.php PHP 7.4.33 (Linux)
File Line Function
/showthread.php 802 errorHandler->error




Raymarine forum / Raymarine Forums / Autopilots v / (DG) Fluxgate compass on ST4000 & new Axiom 9 w/radar

Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
(DG) Fluxgate compass on ST4000 & new Axiom 9 w/radar
04-14-18, 10:10 AM (This post was last modified: 04-16-18 07:30 AM by Derek - Raymarine - Moderator.)
Post: #1
rkliever Offline
Junior Member
**
 		Posts: 7
Joined: Apr 2018
Reputation: 0
(DG) Fluxgate compass on ST4000 & new Axiom 9 w/radar
I have a transom hung rudder on a 31 foot (on deck) sailboat (36 feet LOA with bowsprit) that weighs 16,000 lbs. Which evolution autopilot would be appropriate? The EV-100 is for boats up to 13,200 lbs and larger linear drive units are not waterproof and need to be mounted below decks.

Another question I have is how do I connect my fluxgate compass when I install my new axiom 9 and radar so that my st4000 will still work and the radar data will properly overlay on the chart plotter? I don't currently really have a SeaTalk1 network, just the st4000 with a remote control attached to the seatalk1 connection.
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
(DG) Fluxgate compass on ST4000 & new Axiom 9 w/radar - rkliever - 04-14-18 10:10 AM

Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us | Raymarine forum | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication