Raymarine forum / Raymarine Forums / Radar v / [CA] radar not displaying on chart (eS128)

Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[CA] radar not displaying on chart (eS128)
04-25-18, 10:45 AM (This post was last modified: 04-25-18 10:48 AM by Chuck - Raymarine - Moderator.)
Post: #2
Chuck - Raymarine - Moderator Offline
Administrator
*******
 		Posts: 14,319
Joined: Oct 2014
Reputation: 43
RE: [CA] radar not displaying on chart (eS128)
Welcome to the Raymarine Forum wknudsen,

Sources of heading (not to be confused with GPS COG) data include autopilots, instrument heading sensors, etc.. Has the eS128 been interfaced to a source of heading data? If so, ensure that the device which supplies the system with heading data switched ON and that the Heading data item is populated when attempting to overlay the chart with radar. Should the system not be interfaced to a source of heading data, then please click here to view a FAQ addressing under what conditions the radar imagery may be layered atop the cartography displayed within the Chart application using GPS COG.
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
RE: [CA] radar not displaying on chart (eS128) - Chuck - Raymarine - Moderator - 04-25-18 10:45 AM

Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us | Raymarine forum | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication