[CA11] DSM30/Airmar/E120 Fault Isolation

Thread Rating:

1 Vote(s) - 5 Average
1
2
3
4
5

Threaded Mode | Linear Mode

[CA11] DSM30/Airmar/E120 Fault Isolation

04-26-18, 12:56 PM (This post was last modified: 05-30-18 10:39 AM by Chuck - Raymarine - Moderator.)

Post: #2

Chuck - Raymarine - Moderator Offline

Administrator

Posts: 14,319
Joined: Oct 2014
Reputation: 43

RE: [CA11] DSM30/Airmar/E120 Fault Isolation

Welcome to the Raymarine Forum mistertj,

For the benefit of others view this response, C-Series Widescreen MFDs are not designed to simultaneously function within an Ethernet (SeaTalkhs) network which includes any model of MFD other than one other C-Series Widescreen MFD.

Please click here to view a FAQ addressing how to troubleshoot a DSM problem with an E-Series Classic MFD. If replacing the DSM, it is recommended that it be replaced with a CP370 Sounder Module as indicated within the referenced FAQ.

« Next Oldest | Next Newest »

Messages In This Thread

[CA11] DSM30/Airmar/E120 Fault Isolation - mistertj - 04-23-18, 07:04 AM

RE: [CA11] DSM30/Airmar/E120 Fault Isolation - Chuck - Raymarine - Moderator - 04-26-18 12:56 PM

RE: [CA11] DSM30/Airmar/E120 Fault Isolation - mistertj - 05-20-18, 08:35 AM

RE: [CA] DSM30/Airmar/E120 Fault Isolation - Chuck - Raymarine - Moderator - 05-21-18, 08:08 AM

RE: [CA11] DSM30/Airmar/E120 Fault Isolation - mistertj - 05-25-18, 04:43 PM

RE: [CA] DSM30/Airmar/E120 Fault Isolation - Chuck - Raymarine - Moderator - 05-27-18, 06:05 AM

RE: [CA11] DSM30/Airmar/E120 Fault Isolation - mistertj - 05-30-18, 09:59 AM

RE: [CA11] DSM30/Airmar/E120 Fault Isolation - Chuck - Raymarine - Moderator - 05-30-18, 10:32 AM

User(s) browsing this thread: 1 Guest(s)