[CA11] upgrading to AxiomPro 9

[Chuck - Raymarine - Moderator]

George,

Q1. I will be replacing the SR100 with the new SR150. The SR100 used the old style Ethernet cable. I will need an adapter to connect the Ethernet cable to the new SR150 which uses the Raynet style. The old cable runs back to an old style network switch which I will not be replacing. I am assuming I will not need a crossover adapter.
A1. No crossover coupler will be required. Raymarine offers the A80160 400mm SeaTalkhs (F) to RayNet (F) adapter for such purposes.

Q2a. The system has two e95 displays that I will be replacing with Atom Pro 9 S units. Do I have to set one as master and the other as slave like I did with the e95 setup?
A2a. Yes.

Q2b. Does Raymarine recommend connect only one display to the STng (NMEA2000) network or do I connect each display.
A2b. Please click here to view a FAQ addressing this subject.