[CA11] upgrading to AxiomPro 9

[Chuck - Raymarine - Moderator]

George,

Q1. Can the master display power down the slave display when you power the master off?
A1. Negative. Please click here to view a FAQ including information on the last power state memory feature of Raymarine products.

Q2. After I install the new Axiom Pro displays do I have to re-calibrate the autopilot? I will assume I will not because the autopilot has all its calibration values in the pilot.
A2. It is not necessary to update an autopilot's software after having updated the software within a MFD. However, should an autopilot's software be updated, then it would be recommended that a Pilot Factory Reset, Dockside Wizard, and then calibration cruise be performed. As software updates included with the Axiom / Axiom Pro MFD software updated compressed folder downloads, care should be taken to fully examine the MFD's software update dialogs when performing MFD software updates to ensure that only those products which for one desires an update to be performed have been selected (note: the MFD's software update dialogs permit one to deselect updates to products which one does not desire to update).