The following warnings occurred:
Warning [2] count(): Parameter must be an array or an object that implements Countable - Line: 802 - File: showthread.php PHP 7.4.33 (Linux)
File Line Function
/showthread.php 802 errorHandler->error




Raymarine forum / Raymarine Forums / Communications v / Can two VHF radios be interfaced to a single VHF antenna?

Thread Closed 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Can two VHF radios be interfaced to a single VHF antenna?
05-29-18, 11:00 AM (This post was last modified: 05-29-18 11:02 AM by Chuck - Raymarine - Moderator.)
Post: #1
Chuck - Raymarine - Moderator Offline
Administrator
*******
 		Posts: 14,319
Joined: Oct 2014
Reputation: 43
Can two VHF radios be interfaced to a single VHF antenna?
Can two VHF radios be interfaced to a single VHF antenna?

For maximum VHF radio performance, it is recommended that a dedicated VHF antenna be used for each fixed mount VHF radio. However, should the vessel's design not permit an additional VHF antenna(s) then it is strongly recommended that a third party automatic two-way antenna selector (ex. Shakespeare AS-2, etc.) be installed to support using a single VHF antenna with two VHF radios to prevent damage to the receiver circuitry of the VHF radios.


RAYFAQ#
Find all posts by this user
Thread Closed 


Messages In This Thread
Can two VHF radios be interfaced to a single VHF antenna? - Chuck - Raymarine - Moderator - 05-29-18 11:00 AM

Forum Jump:


User(s) browsing this thread: 2 Guest(s)

Contact Us | Raymarine forum | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication