Raymarine forum / Raymarine Forums / Instruments v / A98 and i40

Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
A98 and i40
04-29-16, 07:56 AM (This post was last modified: 04-29-16 07:57 AM by Chuck - Raymarine - Moderator.)
Post: #2
Chuck - Raymarine - Moderator Offline
Administrator
*******
 		Posts: 14,319
Joined: Oct 2014
Reputation: 43
RE: A98 and i40
Welcome to the Raymarine Forum navherc130,

Raymarine MFDs are neither designed to supply power to nor be powered by a SeaTalkng / NMEA 2000 backbone. As such, the backbones must be separately powered from a switched 12VDC power circuit. Should the backbone consist of only a SeaTalk to SeaTalkng Converter, then the SeaTalkng Power Cable supplied with the SeaTalk to SeaTalkng Converter will be connected to one of the spur ports of the SeaTalk to SeaTalkng Converter. The SeaTalk bus which will be connected to the SeaTalk to SeaTalkng Converter's yellow SeaTalk socket will be powered by the SeaTalk to SeaTalkng Converter.
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
A98 and i40 - navherc130 - 04-28-16, 01:34 PM
RE: A98 and i40 - Chuck - Raymarine - Moderator - 04-29-16 07:56 AM

Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us | Raymarine forum | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication