Raymarine forum / Raymarine Forums / Multifunction Displays v / [TG] Compatibility with SPX

Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[TG] Compatibility with SPX
06-03-18, 10:55 PM
Post: #2
Tom - Raymarine - Moderator Offline
Administrator
*******
 		Posts: 1,067
Joined: Nov 2017
Reputation: 7
RE: Compatibility with SPX
Hello cstotland,

eS and Axiom can both send waypoint/navigation data to Raymarine pilot of the last 20 years or so, through either SeatalkNG directly or through Seatalk1 if connected via one of our Seatalk1-SeatalkNG convertors (part number E22158.) eS displays run the same Lighthouse 2 software as an e7 and offer exactly the same interfacing.

Axiom displays offer a deeper level of pilot control when you have an Evolution pilot (full pilot control, with or without a dedicated pilot display) which isn't possible with an SPX, but SPX will steer fine to waypoint data from either eS or Axiom. You engage Track mode from the pilot display as normal.

Regards,
Tom
Raymarine since 1999.
Interests: Diagnosis of problems in sonar/fishfinders, NMEA2000, ethernet comms, autopilots, thermal cameras
Location: Sydney, Australia.

Please don't PM me asking for direct support, please ask a public question instead so that others can see the question and answer. Forum posts will always be answered before PM requests.
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
Compatibility with SPX - cstotland - 06-02-18, 02:47 PM
RE: Compatibility with SPX - Tom - Raymarine - Moderator - 06-03-18 10:55 PM

Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us | Raymarine forum | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication