[CA] [CA11] Lighthouse 3.4.66 and Penta Easy Connect only port engine is displayed

[Chuck - Raymarine - Moderator]

Welcome to the Raymarine Forum Mikael,

Q1. But my ES127 with Lighthouse 3.4.66 only shows data from Port Engine.
A1. The reported issue is likely resulting from the incorrect Instance ID being transmitted by the engine gateway for the starboard engine. Please click here to view a FAQ addressing this subject. In this case, it would be recommended that Volvo be contacted to determine how you may configure the Volvo system to transmit Instance ID "1" within the PGNs transmitted for the starboard engine.

Q2. What is also strange is that if I try to configure the engines in the settings menu of the MFD, I get error messages saying that no engine data is received for any of my two engines (Volvo Penta D4-300 with EVC-C)
A2. Please click here to view a FAQ addressing this subject. As indicated within the referenced FAQ, the Identify Engines feature is exclusively designed for use with engine systems which have been interfaced to the powered and properly terminated marine electronics SeaTalkng / NMEA 2000 backbone using Raymarine's ECI-100 Engine gateway. Should the transmitted PGNs feature the correct Instance IDs (i.e. 0 for port and 1 for starboard), then the Data application's / Dashboard's panels displaying engine data will automatically populate with the corresponding engine data.

Q3. Is there a known issue with this feature and Lighthouse 3.4.66?
A3. Negative.