The following warnings occurred:
Warning [2] count(): Parameter must be an array or an object that implements Countable - Line: 802 - File: showthread.php PHP 7.4.33 (Linux)
File Line Function
/showthread.php 802 errorHandler->error




Raymarine forum / Raymarine Forums / General Discussions v / [CA] [CA11] New Equipment (Refit)

Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[CA] [CA11] New Equipment (Refit)
06-26-18, 08:37 AM (This post was last modified: 06-27-18 09:49 AM by Chuck - Raymarine - Moderator.)
Post: #1
smdickens Offline
Junior Member
**
 		Posts: 1
Joined: Mar 2018
Reputation: 0
[CA11] New Equipment (Refit)
I am in the process of refitting/upfitting my sailboat. The old system was RL80C, ST60 wind, ST60+ depth, ST7000 autopilot, ST600R remote. My wife is not tech savvy and very new to sailing so it was suggested that I go with the Garmin 7600xsv plotter for ease of use and the GMR fantom radar. But I kept Raymarine for everything else. I got the i50 speed, i50 depth, i60 wind and EV400 autopilot. I am ordering the AIS650 now and I want to check that everything is compatible and will work together efficiently before I install any of it. How much "info" will I use since Garmin uses NMEA2000 and Raymarine uses SeatalkNG?
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
[CA11] New Equipment (Refit) - smdickens - 06-26-18 08:37 AM

Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us | Raymarine forum | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication