[CA11] Using glued in transducer with Axiom.

Thread Rating:

0 Vote(s) - 0 Average
1
2
3
4
5

Threaded Mode | Linear Mode

[CA] [CA11] Using glued in transducer with Axiom.

06-26-18, 08:57 AM

Post: #2

Chuck - Raymarine - Moderator Offline

Administrator

Posts: 14,319
Joined: Oct 2014
Reputation: 43

RE: [CA11] Using glued in transducer with Axiom.

Welcome to the Raymarine Forum StriperMemories,

Axiom DV MFDs and Axiom RV MFDs are compatible with a limited set of Airmar branded transducers. If the transducer was manufactured by Airmar, Inc., then it would feature a tag which would be affixed to the plug end of the transducer's cable. If supplied with a photo of this tag which clearly identifies its manufacturer and model number, then we may be able to make a determination regarding whether it may be adapted for use with an Axiom DV MFD or an Axiom RV MFD.

« Next Oldest | Next Newest »

Messages In This Thread

[CA11] Using glued in transducer with Axiom. - StriperMemories - 06-24-18, 12:25 PM

RE: [CA11] Using glued in transducer with Axiom. - Chuck - Raymarine - Moderator - 06-26-18 08:57 AM

RE: [CA11] Using glued in transducer with Axiom. - StriperMemories - 06-29-18, 04:29 PM

RE: [CA11] Using glued in transducer with Axiom. - Chuck - Raymarine - Moderator - 07-02-18, 07:50 AM

RE: [CA11] Using glued in transducer with Axiom. - StriperMemories - 07-02-18, 08:38 PM

RE: [CA11] Using glued in transducer with Axiom. - Chuck - Raymarine - Moderator - 07-03-18, 08:36 AM

User(s) browsing this thread: 3 Guest(s)