[DG] Wind vane and speed issue

Thread Rating:

0 Vote(s) - 0 Average
1
2
3
4
5

Threaded Mode | Linear Mode

[DG] [DG] Wind vane and speed issue

06-29-18, 08:00 PM (This post was last modified: 07-02-18 04:56 AM by Derek - Raymarine - Moderator.)

Post: #1

Svbelle Offline

Junior Member

Posts: 11
Joined: Jan 2018
Reputation: 0

[DG] Wind vane and speed issue

I have i70s instrument, using the itc-5 converter for my i60 wind transducer.

My power reading without the red plugged in at the ITC-5 is 8.0 v , when I plug the red wire in to power the transducer it drops to 4.85 v. This has to be an issue. I tested the depth,temp, and speed with a constant 8.0v plugged in or not.

The wire readings are as follows.
Blue 1.80
Green 2.04
Yellow .04 to 3.8

The wind transducer wire is uncut from the mast. Is the lower power reading at the red from an issue with the wind transducer.

« Next Oldest | Next Newest »

Messages In This Thread

[DG] Wind vane and speed issue - Svbelle - 06-29-18 08:00 PM

RE: [DG] Wind vane and speed issue - Derek - Raymarine - Moderator - 07-02-18, 05:02 AM

RE: [DG] Wind vane and speed issue - Svbelle - 07-04-18, 09:10 PM

RE: [DG] Wind vane and speed issue - Derek - Raymarine - Moderator - 07-05-18, 03:54 AM

User(s) browsing this thread: 2 Guest(s)