The following warnings occurred:
Warning [2] count(): Parameter must be an array or an object that implements Countable - Line: 802 - File: showthread.php PHP 7.4.33 (Linux)
File Line Function
/showthread.php 802 errorHandler->error





Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[CA] [CA11] Axiom 9RV pre-purchase questions
07-02-18, 02:47 PM (This post was last modified: 07-11-18 07:28 AM by Chuck - Raymarine - Moderator.)
Post: #1
[CA11] Axiom 9RV pre-purchase questions
Hi -

I'm very close to purchasing an Axiom 9RV, but I think that I have run into a couple of minor roadblocks and have several questions:

1 - It appears that non-Pro Axioms do not natively support NMEA0183, and I have an older Raymarine VHF DSC fixed-mount transceiver (215) that needs NMEA0183. Am I correct that the following kit will supply NMEA0183 to the 215 from the 9RV:

http://forum.raymarine.com/showthread.php?tid=2

2 - Can I then use one of the NMEA2000 (white) ports on the converter to establish connectivity to another NMEA2000 device, namely a Fusion MS-IP700i by using a SeaTalkNG to NMEA2000 cable?

3 - I'm I correct in assuming that the NMEA2000 connector on the 9RV's power connector does not supply bias (power) to the NMEA2000 bus?

Thanks in advance for your help,

Mike
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
[CA11] Axiom 9RV pre-purchase questions - Mike_EE - 07-02-18 02:47 PM

Forum Jump:


User(s) browsing this thread: 4 Guest(s)