[CA] [CA11] Airmar b164 and RV-100 on Axiom 7
|
07-13-18, 07:14 AM
Post: #7
|
|||
|
|||
RE: [CA11] Airmar b164 and RV-100 on Axiom 7
Hi Chuck,
Just following up with this. I installed the correct cable, but the unit keeps crashing and rebooting. It seems to only do it when I have both transducers plugged in. It does NOT do it when I have ONLY the b164 plugged in. But if I plug the RV-100 in, it crashes. It also will not see the RV-100 when it is the only one installed (on the adapter cable)- without the b164. I got it to work one time when I installed the b164 only and and set it up in the settings. I then rebooted with the RV-100 plugged in and everything worked. But shortly after when I restarted again- it crashed. Is there an additional setting I need to configure? Any help would be appreciated. Thanks |
|||
« Next Oldest | Next Newest »
|
Messages In This Thread |
[CA11] Airmar b164 and RV-100 on Axiom 7 - hstechfl - 07-05-18, 11:15 AM
RE: [CA11] Airmar b164 and RV-100 on Axiom 7 - Chuck - Raymarine - Moderator - 07-05-18, 03:50 PM
RE: [CA11] Airmar b164 and RV-100 on Axiom 7 - hstechfl - 07-05-18, 06:45 PM
RE: [CA11] Airmar b164 and RV-100 on Axiom 7 - Chuck - Raymarine - Moderator - 07-06-18, 10:51 AM
RE: [CA11] Airmar b164 and RV-100 on Axiom 7 - hstechfl - 07-06-18, 11:56 AM
RE: [CA11] Airmar b164 and RV-100 on Axiom 7 - Chuck - Raymarine - Moderator - 07-06-18, 12:47 PM
RE: [CA11] Airmar b164 and RV-100 on Axiom 7 - hstechfl - 07-13-18 07:14 AM
RE: [CA11] Airmar b164 and RV-100 on Axiom 7 - Chuck - Raymarine - Moderator - 07-16-18, 08:11 AM
RE: [CA11] Airmar b164 and RV-100 on Axiom 7 - hstechfl - 12-27-18, 08:50 PM
RE: [CA11] Airmar b164 and RV-100 on Axiom 7 - Chuck - Raymarine - Moderator - 12-28-18, 10:17 AM
|
User(s) browsing this thread: 2 Guest(s)