The following warnings occurred:
Warning [2] count(): Parameter must be an array or an object that implements Countable - Line: 802 - File: showthread.php PHP 7.4.33 (Linux)
File Line Function
/showthread.php 802 errorHandler->error




Raymarine forum / Raymarine Forums / Multifunction Displays v / [CA] [CA11] ES98, CP200, CP100 guidance

Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[CA] [CA11] ES98, CP200, CP100 guidance
07-18-18, 03:19 AM (This post was last modified: 07-19-18 03:25 PM by Chuck - Raymarine - Moderator.)
Post: #1
MartynCat Offline
Junior Member
**
 		Posts: 1
Joined: Jul 2018
Reputation: 0
[CA11] ES98, CP200, CP100 guidance
Hello,
Have bought a boat with an ES98 unit fitted with a CP100 Downvision transducer. Don't know how. Does it connect directly to the ES98 or could it be connected via a network switch? I have also bought a CP200 Sidevision sonar module (Used)and new transducer which needs is connected to the ES98 head unit. Can the CP200 be connected directly or does it connect to the ES98 through a network switch? What am I missing? Network switch? Cables? Which ones please? Also the CP200 sonar unit is missing its power cable. Where can buy one from please? What is the part number. Thanks.
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
[CA11] ES98, CP200, CP100 guidance - MartynCat - 07-18-18 03:19 AM

Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us | Raymarine forum | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication