Raymarine forum / Raymarine Forums / Multifunction Displays v / (DG) Adding E120 to Seatalkng Netwrok?

Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
(DG) Adding E120 to Seatalkng Netwrok?
07-19-18, 10:48 AM (This post was last modified: 07-19-18 11:18 AM by Chuck - Raymarine - Moderator.)
Post: #19
Jeffg Offline
Junior Member
**
 		Posts: 16
Joined: Feb 2017
Reputation: 0
RE: (DG) Adding E120 to Seatalkng Netwrok?
Hi Derek,
Thank you for the reply. I was having problems with the E120 not seeing my GPS antenna, but after rewiring the Seatalk connection, it now works fine. So, I assume that the Seatalk connection is now working. I did check the System Integration menu and it was NOT enabled. I have now enabled it, but the cross did not go away. I will have to wait to take the boat out for a ride to see if it now will follow a route. Also, I am in the process of tracing the wiring for my network. The PO did not have a diagram, so I am stumbling through the process. I am sure I will have more questions as I develop the schematic.
Thanks,
Jeff
Thanks,
Jeff Gardiner
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
RE: (DG) Adding E120 to Seatalkng Netwrok? - Jeffg - 07-19-18 10:48 AM

Forum Jump:


User(s) browsing this thread: 2 Guest(s)

Contact Us | Raymarine forum | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication