Raymarine forum / Raymarine Forums / Multifunction Displays v / [TG] Password for Axiom 7

Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[TG] Password for Axiom 7
07-30-18, 02:10 AM
Post: #2
Tom - Raymarine - Moderator Offline
Administrator
*******
 		Posts: 1,067
Joined: Nov 2017
Reputation: 7
RE: Password for Axiom 7
Hello David,

That looks like you may have very early software in your Axiom. The current software is Lighthouse 3.6, I think you might have as early as 3.0 (support for the Raymarine remote apps was added in 3.1.) You can check your version on the Getting Started tab in Settings, and if the software is old then you can update it either the over-the-air update process using a Wifi hot-spot (easiest, will need to download around 1Gb so be careful if using a portable hotspot/phone) or by downloading the software from http://www.raymarine.com.au/software-upd...-axiompro/. Update instructions are on the same page.

Every new update adds features and fixes issues so we always recommend keeping up-to-date.

Tegards,
Tom
Raymarine since 1999.
Interests: Diagnosis of problems in sonar/fishfinders, NMEA2000, ethernet comms, autopilots, thermal cameras
Location: Sydney, Australia.

Please don't PM me asking for direct support, please ask a public question instead so that others can see the question and answer. Forum posts will always be answered before PM requests.
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
Password for Axiom 7 - David Goad - 07-27-18, 04:29 AM
RE: Password for Axiom 7 - Tom - Raymarine - Moderator - 07-30-18 02:10 AM

Forum Jump:


User(s) browsing this thread: 5 Guest(s)

Contact Us | Raymarine forum | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication