Adding Devices

[Chuck - Raymarine - Moderator]

It is recommended that you again download the SR150 software update zip file to your computer, that its contents be extracted/copied and then pasted into the root level directory of a microSD memory card. After doing so, the autorun files attached to this response should be downloaded and pasted into the root level directory of the microSD memory card, replacing those which had previously been pasted into the root level directory of the microSD memory card.

Should following the recommendations provided within this response not result in successful updating of the SR150's software, then it is recommended that the Converter be sent to Raymarine’s Product Repair Center to be updated.

As indicated within the initial response, after performing the update, you must then correctly configure the system's Weather Receiver Type setting to specify that the system's Receiver Type is the SR150.