The following warnings occurred:
Warning [2] count(): Parameter must be an array or an object that implements Countable - Line: 802 - File: showthread.php PHP 7.4.33 (Linux)
File Line Function
/showthread.php 802 errorHandler->error




Raymarine forum / Raymarine Forums / Multifunction Displays v / [CA] [CA11] Jumping display c90w

Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[CA] [CA11] Jumping display c90w
09-04-18, 04:14 PM (This post was last modified: 09-11-18 02:01 PM by Chuck - Raymarine - Moderator.)
Post: #1
Ragha Offline
Junior Member
**
 		Posts: 3
Joined: Jul 2018
Reputation: 0
[CA11] Jumping display c90w
Hello,
My c90w display jumps around especially when at low speed or when not moving. The boat symbol and route move first, then the chart. Very annoying. It has been like this since 2014 when I purchased the boat. I read about how the icon will be oriented to GPS COG in the absence of heading data:

http://raymarine.ning.com/forum/topics/w...mment77812

I have a fluxgate compass connected to the SPX10. Do I need to connect another compass to the c90w to get rid of this problem or is something wrong with my fluxgate? Tne display jumps also when i choose N up, although not as much.
Any ideas?
Thanks,
Ragnar
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
[CA11] Jumping display c90w - Ragha - 09-04-18 04:14 PM
RE: [CA11] Jumping display c90w - Ragha - 11-02-18, 11:47 AM
RE: [CA11] Jumping display c90w - Ragha - 11-04-18, 12:44 PM

Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us | Raymarine forum | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication