Raymarine forum / Raymarine Forums / Multifunction Displays v / [TG] [TG11] Miracast with the Axiom Pro

Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[TG] [TG11] Miracast with the Axiom Pro
09-26-18, 12:17 AM
Post: #23
Tom - Raymarine - Moderator Offline
Administrator
*******
 		Posts: 1,067
Joined: Nov 2017
Reputation: 7
RE: [TG11] Miracast with the Axiom Pro
Hello George,

It seems that the MFD's main Wifi connection channel setup (Home > Settings > This Display > Wifi Connection Settings > Configure > Channel) also controls the Miracast channel, and this has a significant impact on Miracast reliability. In this office, Ch11 (default) gives poor Miracast performance, but Ch3 and Ch4 give reliable operation.

Attached are images of what our local environment looks like on Wifi Analyzer and an SDR analyser on each channel, as an illustration of the difference. Another thing to take into account that I wasn't previously aware of.

Regards,
Tom


Attached File(s) Thumbnail(s)
           
Raymarine since 1999.
Interests: Diagnosis of problems in sonar/fishfinders, NMEA2000, ethernet comms, autopilots, thermal cameras
Location: Sydney, Australia.

Please don't PM me asking for direct support, please ask a public question instead so that others can see the question and answer. Forum posts will always be answered before PM requests.
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
RE: [TG11] Miracast with the Axiom Pro - Tom - Raymarine - Moderator - 09-26-18 12:17 AM

Forum Jump:


User(s) browsing this thread: 2 Guest(s)

Contact Us | Raymarine forum | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication