[CA] [CA11] Axiom 7 RV added functionality

[Skagit22]

Chuck, i am proceeding with the RV-100 transducer on the Axiom 7 RV model and adding in (y-cable) the B744V.

A question on powering the network.

I plan to use the “Network” plug to connect a Converter to acquire a NMEA 0183 output for a VHF radio....and in the future.... allow for adding an AIS 650 and CP-370

I plan to use the “Power NMEA 2000” plug to connect to a small NMEA network where I have only an input from a Suzuki DF250 and output to a C-10 multifunction gauge.

The small NMEA 2000 network has 12v power applied. Do i need to add 12v power to the “Network” side of the wiring...or will the “Network” acquire power from the NMEA 2000 side?

Thanks
Doug