The following warnings occurred:
Warning [2] count(): Parameter must be an array or an object that implements Countable - Line: 802 - File: showthread.php PHP 7.4.33 (Linux)
File Line Function
/showthread.php 802 errorHandler->error




Raymarine forum / Raymarine Forums / Fishfinders v / [CA] [CA11] DSM300 Power Supply

Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[CA] [CA11] DSM300 Power Supply
01-07-19, 10:05 AM (This post was last modified: 01-07-19 12:06 PM by Chuck - Raymarine - Moderator.)
Post: #1
hadjiosif Offline
Junior Member
**
 		Posts: 9
Joined: Jul 2018
Reputation: 0
[CA11] DSM300 Power Supply
I have a DSM300 connected to an E80 classic network via a Seatalk HS ethernet cable. My question is: Is the DS300 drawing power even when not being used or displayed on the chartplotter (which is most of the time in my case) or is it shut off when not displayed? My concern is about using considerable battery power when under sail and not needed. Can I turn the power off from the E80? If not, would it be OK to insert a toggle switch in the DS300 power cable and turn in off manually? Right now, all instruments are turned on by one switch. Thanks.
Lee
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
[CA11] DSM300 Power Supply - hadjiosif - 01-07-19 10:05 AM

Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us | Raymarine forum | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication