The following warnings occurred:
Warning [2] count(): Parameter must be an array or an object that implements Countable - Line: 802 - File: showthread.php PHP 7.4.33 (Linux)
File Line Function
/showthread.php 802 errorHandler->error




Raymarine forum / Raymarine Forums / Fishfinders v / [CA] [CA11] Dragonfly 4DVS not powering on

Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[CA] [CA11] Dragonfly 4DVS not powering on
01-18-19, 02:15 PM (This post was last modified: 01-18-19 03:05 PM by Chuck - Raymarine - Moderator.)
Post: #1
Leechiro Offline
Junior Member
**
 		Posts: 4
Joined: Jan 2019
Reputation: 0
[CA11] Dragonfly 4DVS not powering on
Hey, thanks for the add to the forum. I’ve been looking to find a fix for following:

Battery/volt test shows power getting all the way to the green plug before plugging into my dragonfly 4DVS screen. Pin 4 is fine and stayed at 12.8v but pin 5 started off at about 12.8v and then started a countdown. It literally just started dropping smoothly to 11 and then finally 10.X before I stopped testing. Im guessing that’s the issue but what’s the fix? And why is it doing that?

Thanks for any advice
Nelson
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
[CA11] Dragonfly 4DVS not powering on - Leechiro - 01-18-19 02:15 PM

Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us | Raymarine forum | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication