[CA] [CA11] Upgrade options

[Chuck - Raymarine - Moderator]

Welcome to the Raymarine Forum serenisea,

Nothing configuration settings need be performed to view chart data from a LightHouse Chart card other than to ensure each of the following:
- the microSD memory card containing the LightHouse Charts has been inserted into the microSD memory card reader of one of the system's MFDs or into a Raymarine remote USB memory card reader which has been interfaced to the USB port of one of the system's MFDs; and
- the LightHouse Chart option has been selected from the Cartography tab of the Chart application's settings dialog (MENU->SETTINGS->CARTOGRAPHY). Note: the Description field of the Cartography tab of the Chart application's Settings dialog should provide details of the LightHouse Charts cartography which you have selected ... if not, then it would indicate a problem with the LightHouse chart card or with the reader.

Please additionally that a defect has been identified within the LightHouse 3 v3.8.97 software update which prevents spot soundings from being displayed within the Chart application when viewing LightHouse US NOAA Vector Charts. This problem will not affect LightHouse Charts which are produced from raster cartography. This problem has been logged and it is expected that it will be addressed within a future LightHouse 3 software update. Should it be immediately necessary to use LightHouse US NOAA Vector Charts, then it would be recommended that the software within the system's MFDs software be downgraded to LightHouse 3 v3.7.70 until such time as this problem has been addressed.

Should the problem be occur with LightHouse 3 v3.7.70 software, then please attach screen snapshots of the MFD's screen when displaying the artography tab of the Chart application's Settings dialog and the Chart application when the reported problem is observed.