[CA] [CA11] CP300 with C90W

[Chuck - Raymarine - Moderator]

Welcome to the Raymarine Forum nvbowfish,

Sometimes the CP300 will not detect the 1kW sense resistor within a 1kW transducer. When this happens, the 600W transducer list will be presented. This condition may be easily verified by determining whether the displayed transducer list included the B744V transducer. If so, then it is recommended that a Sonar Reset command be executed from the fishfinder settings dialog and that afterwards you then attempt to configure the Fishinder application's Transducer configuration setting.