The following warnings occurred:
Warning [2] count(): Parameter must be an array or an object that implements Countable - Line: 802 - File: showthread.php PHP 7.4.33 (Linux)
File Line Function
/showthread.php 802 errorHandler->error




Raymarine forum / Raymarine Forums / Multifunction Displays v / [CA] [CA11] can LH3 support third party IP camera that is higher than 1080P now?

Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[CA] [CA11] can LH3 support third party IP camera that is higher than 1080P now?
02-07-19, 08:36 PM (This post was last modified: 02-08-19 03:22 PM by Chuck - Raymarine - Moderator.)
Post: #1
ray18 Offline
Member
***
 		Posts: 91
Joined: Feb 2017
Reputation: 0
[CA11] can LH3 support third party IP camera that is higher than 1080P now?
can LH3 now support third party IP camera that is higher than 1080P now?

I have a Axiom MFD would like to buy a 4K camera to connect to Axiom.



> - Network/IP Cameras (ex. Raymarine CAM210, CAM220, CAM200IP, FLIR
> M132/M232 Thermal Cameras (MFDs running LH3 software only ... MFDs
> running LightHouse II software will be able to display video only from
> these thermal cameras), etc.) and video encoders (ex. Axis M70 Series
> Encoders (M7011, M7014, M7016), etc.)
> IP Camera Product Requirements:
> - Must support H.264 video compression
> - Must support RTSP (Real Time Streaming Protocol)
> - Must support ONVIF Service Detection (ONVIF User Authentication MUST
> BE DISABLED)
> - Must have DHCP enabled & Dynamic IP set to ON
> - 720p resolution or 1080P
http://www.youtube.com/njfishing1 - from Captain Steve
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
[CA11] can LH3 support third party IP camera that is higher than 1080P now? - ray18 - 02-07-19 08:36 PM

Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us | Raymarine forum | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication