Raymarine forum / Raymarine Forums / Multifunction Displays v / [CA] [CA11] Axiom Pro S internal sonar question

Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[CA] [CA11] Axiom Pro S internal sonar question
02-20-19, 01:14 PM
Post: #2
Chuck - Raymarine - Moderator Offline
Administrator
*******
 		Posts: 14,319
Joined: Oct 2014
Reputation: 43
RE: [CA11] Axiom Pro S internal sonar question
Welcome to the Raymarine Forum cc driver,

Consistent with the CP470's Installation Guide and as indicated within the FAQ found here, the power output of the CPT-S transducers as well as the low power / high frequency CHIRP conical element of RealVision 3D transducers and DownVision transducers is 200W. Accordingly, whether interfaced to an Axiom DV MFD, Axiom RV MFD, Axiom Pro S MFD, Axiom Pro RVX MFD, eSx8 MFD, ax8 MFD, RVX1000 Sounder Module, or CP100 Sounder Module, the power output to a CPT-S transducer or the low power (200W), high frequency CHIRP (conical) sonar element of a RealVision 3D transducer or DownVision transducer will be 200W.
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
RE: [CA11] Axiom Pro S internal sonar question - Chuck - Raymarine - Moderator - 02-20-19 01:14 PM

Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us | Raymarine forum | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication