Raymarine forum / Raymarine Forums / Networking / System Integration v / [CA] [CA11] Configure New Network and Incorporate S2 Course Computer

Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[CA] [CA11] Configure New Network and Incorporate S2 Course Computer
03-11-19, 03:55 PM (This post was last modified: 03-11-19 03:56 PM by Chuck - Raymarine - Moderator.)
Post: #20
Chuck - Raymarine - Moderator Offline
Administrator
*******
 		Posts: 14,319
Joined: Oct 2014
Reputation: 43
RE: [CA11] Configure New Network and Incorporate S2 Course Computer
Scott,

I would not recommend crimp connectors for very small wires such as NMEA 0183 leads. Should you prefer not to create soldered splices, then you may want to consider use of a commonly available euro style terminal block shown below.

[Image: 70223700.jpg]
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
RE: [CA11] Configure New Network and Incorporate S2 Course Computer - Chuck - Raymarine - Moderator - 03-11-19 03:55 PM

Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us | Raymarine forum | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication