The following warnings occurred:
Warning [2] count(): Parameter must be an array or an object that implements Countable - Line: 802 - File: showthread.php PHP 7.4.33 (Linux)
File Line Function
/showthread.php 802 errorHandler->error




Raymarine forum / Raymarine Forums / Multifunction Displays v / [DG] [DG11] Raymarine A98 Rebooting Repeatedly

Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[DG] [DG11] Raymarine A98 Rebooting Repeatedly
03-20-19, 06:52 PM (This post was last modified: 03-25-19 07:34 AM by Derek - Raymarine - Moderator.)
Post: #1
svbloom Offline
Junior Member
**
 		Posts: 38
Joined: Jun 2016
Reputation: 0
[DG11] Raymarine A98 Rebooting Repeatedly
We recently upgraded all of our electronics. Previously, we had our A98 MFD with the old ST60+ autohelm, wind, and tridata. We now have the A98 MFD with the P70S display for the ACU 400 and 2 multi-displays. We just completed the install and powered everything up- all good! After several minutes (no more than 10) while we were setting the new i70S's up, the charplotter rebooted. Okay, weird, but fine. Then a few minutes later it did it again, but this time it just kept rebooting the boot-up screen with the lighthouse on it. It eventually got past that screen to the main one where we selected 'Charts' before it promptly rebooted itself again. One other issue is that the AIS data that used to feed into the MFD is no longer being received. (iCom MXA-5000 Receiver plugged directly into MFD) Any advice as to what might be going on or how to fix these issues?
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
[DG11] Raymarine A98 Rebooting Repeatedly - svbloom - 03-20-19 06:52 PM

Forum Jump:


User(s) browsing this thread: 2 Guest(s)

Contact Us | Raymarine forum | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication