[DG] [DG11] A70d software update

[Derek - Raymarine - Moderator]

Hi ptempel

Thank you for your enquiry.

The software upgrade on the A70d should be quite straight forward, and it should not be causing the MFD stop powering up.

Please try a full factory reset,
* With the unit turned off press and hold the left hand soft key
* Keep it pressed and turn the unit on
* On screen it will say 'Factory Reset' and count down from 3
* Unit will reset and load into normal operation. This can take a couple of extra minutes than normal.

**Please make sure you back up all Waypoints and Routes etc to a separate Compact Flash Card other than your Cartography Card**

If the unit still will not power up correctly, we recommend the unit be sent to Raymarine’s Product Repair Center to be bench checked / serviced.

Regards
Derek