The following warnings occurred:
Warning [2] count(): Parameter must be an array or an object that implements Countable - Line: 802 - File: showthread.php PHP 7.4.33 (Linux)
File Line Function
/showthread.php 802 errorHandler->error





Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[TG] [TG11] Wind transducer cable voltages
03-24-19, 05:15 AM (This post was last modified: 03-25-19 02:33 PM by Chuck - Raymarine - Moderator.)
Post: #1
[TG11] Wind transducer cable voltages
I have an essentially Raymarine system for a small 30ft race yacht 2011 vintage. It uses STng with an A50 mfd, ST70 and i70 displays, with ST 70 autopilot controller. I have added a tacktick nmea via SeaTalk STng converter. All been ok for a yr or so. I noticed problems with incorrect awa on one tack. Wind speed seemed ok. So tried to recalibrate. The system got stuck continually during the turn at 18%. I have the checked the wind transducer to wind pod. Firstly the continuity test from mast junction box to pod all ok. The voltages at the pod are red-shield 7.21 steady. Green shield 4.21 varying with wind blue shield 1.21 varying. Light breeze 12kts. Does this indicate a problem with cable or transducer. What do you suggest? Regards jaa. Western Australia
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
[TG11] Wind transducer cable voltages - Jaa - 03-24-19 05:15 AM

Forum Jump:


User(s) browsing this thread: 1 Guest(s)