Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[TG] [TG11] Wind transducer cable voltages
03-26-19, 08:53 PM
Post: #2
RE: [TG11] Wind transducer cable voltages
Hello Jaa,

What's the range that the blue and green signals are varying through? These two together are the wind angle signal (a sine-cosine pair) and we'd expect them to sweep smoothly and evenly through the range of approx. 2 - 6V throughout a 360deg change in wind-angle (circle of the boat.) I would guess that you won't see that, that one or both of them will be essentially static through at least part of the turn. This indicates a problem between there and the masthead, perhaps some moisture having crept past and insufficiently-compressed O-ring where the masthead sensor is mounted to the base, and into the masthead connector.

Regards,
Tom

Raymarine since 1999.
Interests: Diagnosis of problems in sonar/fishfinders, NMEA2000, ethernet comms, autopilots, thermal cameras
Location: Sydney, Australia.

Please don't PM me asking for direct support, please ask a public question instead so that others can see the question and answer. Forum posts will always be answered before PM requests.
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
RE: [TG11] Wind transducer cable voltages - Tom - Raymarine - Moderator - 03-26-19 08:53 PM

Forum Jump:


User(s) browsing this thread: 1 Guest(s)