[CA] [CA11] Routing Limitations on E90W
|
03-28-19, 03:07 PM
(This post was last modified: 03-28-19 03:08 PM by Chuck - Raymarine - Moderator.)
Post: #2
|
|||
|
|||
RE: [CA11] Routing Limitations on E90W
Welcome back to the Raymarine Forum Viben,
The requested information is found within Chapter 5.4 Waypoints, routes and tracks storage capacity of the E-Series Widescreen MFD Reference Manual. Q1. Maximum number of waypoints per route? A1. 50 Q2. Maximum number of waypoints to be stored on the plotter? A2. 3000 waypoints; 100 groups Q3. Maximum number of routes to be stored on the plotter? A3. 150 Q4. Maximum number of waypoints per track? A4. Maximum number of track points per track = 1000; maximum total number of track points within the system is 10,000 Q5. Maximum number of tracks to be stored on the plotter? A5. 15 tracks Q6. Any other limitations to be aware of? A6. The following additional constraints should be heeded with this product - Waypoint/Route'/Track Name Length: 16 characters (DO NOT USE APOSTROPHE (') OR DOUBLE QUOTE (") CHARACTERS); - Duplication of waypoint, route, or track names prohibited - Waypoint comments: 32 characters (DO NOT USE APOSTROPHE (') OR DOUBLE QUOTE (") CHARACTERS) - Routes: routes must not use the same waypoint for consecutive points within the route |
|||
« Next Oldest | Next Newest »
|
Messages In This Thread |
[CA11] Routing Limitations on E90W - viben - 03-27-19, 09:19 PM
RE: [CA11] Routing Limitations on E90W - Chuck - Raymarine - Moderator - 03-28-19 03:07 PM
RE: [CA11] Routing Limitations on E90W - viben - 03-29-19, 10:43 AM
RE: [CA11] Routing Limitations on E90W - Chuck - Raymarine - Moderator - 03-29-19, 12:28 PM
|
User(s) browsing this thread: 1 Guest(s)