The following warnings occurred:
Warning [2] count(): Parameter must be an array or an object that implements Countable - Line: 802 - File: showthread.php PHP 7.4.33 (Linux)
File Line Function
/showthread.php 802 errorHandler->error




Raymarine forum / Raymarine Forums / Instruments v / [CA] [CA11] i40 depth gauge

Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[CA] [CA11] i40 depth gauge
04-04-19, 04:39 PM (This post was last modified: 04-08-19 03:08 PM by Chuck - Raymarine - Moderator.)
Post: #1
Luther Offline
Junior Member
**
 		Posts: 1
Joined: Apr 2019
Reputation: 0
[CA11] i40 depth gauge
I have an ES15 MFD, Auto Pilot, VHF radio and i40 Depth Monitor. The VHF Radio and Autopilot both have power buttons. However, the 140 does not have a power button and does not power down when turning off the MFD. According to the manual on page 24 the i40 can be powered directly to 12 volts or powered through Sea Talk. Mine is connected to Sea Talk, shouldn't it power down when the MFD is powered off.
Thanks for your help.
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
[CA11] i40 depth gauge - Luther - 04-04-19 04:39 PM

Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us | Raymarine forum | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication