The following warnings occurred:
Warning [2] count(): Parameter must be an array or an object that implements Countable - Line: 802 - File: showthread.php PHP 7.4.33 (Linux)
File Line Function
/showthread.php 802 errorHandler->error




Raymarine forum / Raymarine Forums / Networking / System Integration v / [CA] [CA11] network switch

Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[CA] [CA11] network switch
04-06-19, 10:46 AM (This post was last modified: 04-09-19 11:12 AM by Chuck - Raymarine - Moderator.)
Post: #1
Sallysea Offline
Junior Member
**
 		Posts: 43
Joined: Feb 2016
Reputation: 0
[CA11] network switch
It appears that my network switch HS5 is malfunctioning. When first set up the red light was on and the green lights were for every connection. Now the green lights are off and the red light is on. The network is down as configured. When I connect a device directly to the network feed, bypassing the HS5, the device is recognized on my c127. So I think the HS5 is bad. Apparently I need some sort of reference number. It should still be on warranty with serial number 0770582. suggestions?
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
[CA11] network switch - Sallysea - 04-06-19 10:46 AM

Forum Jump:


User(s) browsing this thread: 2 Guest(s)

Contact Us | Raymarine forum | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication