Raymarine forum / Raymarine Forums / Networking / System Integration v / [CA] [CA11] M260 Tranducer

Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[CA] [CA11] M260 Tranducer
04-24-19, 08:48 PM (This post was last modified: 04-25-19 07:51 AM by Chuck - Raymarine - Moderator.)
Post: #7
striperstan Offline
Junior Member
**
 		Posts: 17
Joined: Feb 2016
Reputation: 0
RE: [CA11] M260 Tranducer
For what it's worth, I replaced a Furuno NavNet system with a BFF1 with Raymarine eS128 and eS 128 MFDs and a CP470. I swapped my M260 with an M265, and it works great. The good news is that you can keep the lower half of the m260 tank and just replace the top half, making the installation a snap. Airmar has a flysheet on how to do this.
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
[CA11] M260 Tranducer - RKW68 - 04-24-19, 05:59 AM
RE: [CA11] M260 Tranducer - RKW68 - 04-24-19, 11:58 AM
RE: [CA11] M260 Tranducer - RKW68 - 04-24-19, 12:47 PM
RE: [CA11] M260 Tranducer - striperstan - 04-24-19 08:48 PM
RE: [CA11] M260 Tranducer - RKW68 - 04-25-19, 06:21 AM
RE: [CA11] M260 Tranducer - RKW68 - 04-25-19, 11:51 AM
RE: [CA11] M260 Tranducer - striperstan - 04-26-19, 04:32 PM

Forum Jump:


User(s) browsing this thread: 5 Guest(s)

Contact Us | Raymarine forum | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication