Raymarine forum / Raymarine Forums / Networking / System Integration v / [CA] [CA11] M260 Tranducer

Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[CA] [CA11] M260 Tranducer
04-26-19, 04:32 PM
Post: #12
striperstan Offline
Junior Member
**
 		Posts: 17
Joined: Feb 2016
Reputation: 0
RE: [CA11] M260 Tranducer
I spoke with Paul Crosby at Airmar/Gemeco when I swapped my M260 for a 265. He pointed me towards this installation supplement, after we confirmed that my old tank was the newer model, as Chuck mentioned. If you don't have a metal top, then yours should be to.. http://www.airmar.com/uploads/InstallGui...446-02.pdf

Here is a screenshot of my M265/CP-470 combination:
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
[CA11] M260 Tranducer - RKW68 - 04-24-19, 05:59 AM
RE: [CA11] M260 Tranducer - RKW68 - 04-24-19, 11:58 AM
RE: [CA11] M260 Tranducer - RKW68 - 04-24-19, 12:47 PM
RE: [CA11] M260 Tranducer - striperstan - 04-24-19, 08:48 PM
RE: [CA11] M260 Tranducer - RKW68 - 04-25-19, 06:21 AM
RE: [CA11] M260 Tranducer - RKW68 - 04-25-19, 11:51 AM
RE: [CA11] M260 Tranducer - striperstan - 04-26-19 04:32 PM

Forum Jump:


User(s) browsing this thread: 6 Guest(s)

Contact Us | Raymarine forum | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication