The following warnings occurred:
Warning [2] count(): Parameter must be an array or an object that implements Countable - Line: 802 - File: showthread.php PHP 7.4.33 (Linux)
File Line Function
/showthread.php 802 errorHandler->error




Raymarine forum / Raymarine Forums / Product and Feature Suggestions v / [CA] [CA11] Storing AIS data in memory - Axiom

Post Reply 
 
Thread Rating:
  • 1 Vote(s) - 4 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[CA] [CA11] Storing AIS data in memory - Axiom
05-07-19, 06:15 AM (This post was last modified: 05-09-19 10:16 AM by Chuck - Raymarine - Moderator.)
Post: #1
jefti Offline
Junior Member
**
 		Posts: 9
Joined: May 2019
Reputation: 0
[CA11] Storing AIS data in memory - Axiom
Hi,

I'm using an Axiom 9 RV at the moment. AIS works great. What I find annoying though, is that after a restart of the Axiom, all details of AIS targets are "forgotten". Every single vessel is displayed with MMSI only, and one has to wait for the AIS sentence with all the details before a vessel is recognizable. This takes 6 minutes, or 12 minutes if you've missed the first sentence. I run Shipplotter on a fixed server, and that application stores all details for further use. A file with over 30k vessels is only 1.5 MB, so storing it is not a big thing, but is very helpfull. Could such a feature be added into Lighthouse?
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
[CA11] Storing AIS data in memory - Axiom - jefti - 05-07-19 06:15 AM

Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us | Raymarine forum | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication