Raymarine forum / Raymarine Forums / Multifunction Displays v / [CA] [CA11] E120 Fuse Sizing

Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[CA] [CA11] E120 Fuse Sizing
05-13-19, 02:52 PM (This post was last modified: 05-14-19 08:27 AM by Chuck - Raymarine - Moderator.)
Post: #2
Chuck - Raymarine - Moderator Offline
Administrator
*******
 		Posts: 14,319
Joined: Oct 2014
Reputation: 43
RE: [CA11] E120 Fuse Sizing
Welcome to the Raymarine Forum Terry,

When interfaced to a 2kW radome, the E120's circuit should be protected with 15A fuse or 10A breaker. The DSM300's circuit should be protected with an 8A fuse or 10A breaker. The SeaTalkhs Network Switch's circuit should be protected with a 2A fuse. Please note that there are two pages of Retired Fishfinder Manuals and that the DSM30/300's Manual is located on the second page (2 of 2).
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
[CA11] E120 Fuse Sizing - tdrichards - 05-13-19, 01:22 PM
RE: [CA11] E120 Fuse Sizing - Chuck - Raymarine - Moderator - 05-13-19 02:52 PM

Forum Jump:


User(s) browsing this thread: 2 Guest(s)

Contact Us | Raymarine forum | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication