Raymarine forum / Raymarine Forums / Multifunction Displays v / [CA] [CA11] Lighthouse v3.9.46 in eS127 Reliability

Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[CA] [CA11] Lighthouse v3.9.46 in eS127 Reliability
05-24-19, 09:46 AM (This post was last modified: 05-28-19 01:54 PM by Chuck - Raymarine - Moderator.)
Post: #2
Chuck - Raymarine - Moderator Offline
Administrator
*******
 		Posts: 14,319
Joined: Oct 2014
Reputation: 43
RE: [CA11] Lighthouse v3.9.46 in eS127 Reliability
Welcome back to the Raymarine Forum Hube,

It is recommended that a power on reset be performed to any MFDs which have been updated to LightHouse 3 v3.9.46. Please click here to view a FAQ addressing how to perform a power on factory reset to Raymarine MFDs.

It is also recommended that the Sonar Logging feature be switched OFF and that a started track not be left in that state indefinitely.

Finally, it would be considered to be a best practice that any time that the vessel anchors or ties up, that any track which as been started be stopped (and saved if so desired). A new track may then be started when the vessel gets underway again.
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
RE: [CA11] Lighthouse v3.9.46 in eS127 Reliability - Chuck - Raymarine - Moderator - 05-24-19 09:46 AM

Forum Jump:


User(s) browsing this thread: 7 Guest(s)

Contact Us | Raymarine forum | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication