The following warnings occurred:
Warning [2] count(): Parameter must be an array or an object that implements Countable - Line: 802 - File: showthread.php PHP 7.4.33 (Linux)
File Line Function
/showthread.php 802 errorHandler->error




Raymarine forum / Raymarine Forums / Multifunction Displays v / [CA] [CA11] Axiom 12 problem

Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[CA] [CA11] Axiom 12 problem
05-27-19, 05:11 PM (This post was last modified: 06-03-19 02:53 PM by Chuck - Raymarine - Moderator.)
Post: #1
viking752 Offline
Junior Member
**
 		Posts: 1
Joined: Dec 2018
Reputation: 0
[CA11] Axiom 12 problem
I have an Axiom 12 that is just short of 3 years old on my 25 foot Center Console. Recently the display stopped powering on and remains black with a glow of power to the Power slider. I have checked the fuses, connections etc. phoned tech support with no good result. Are there any things I can try at this point? I have been instructed (by tech support) on how to do a master reset on the unit but am hesitant as 3 years of waypoints etc. will be lost.
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
[CA11] Axiom 12 problem - viking752 - 05-27-19 05:11 PM

Forum Jump:


User(s) browsing this thread: 2 Guest(s)

Contact Us | Raymarine forum | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication