The following warnings occurred:
Warning [2] count(): Parameter must be an array or an object that implements Countable - Line: 802 - File: showthread.php PHP 7.4.33 (Linux)
File Line Function
/showthread.php 802 errorHandler->error




Raymarine forum / Raymarine Forums / Multifunction Displays v / [CA] [CA11] Axiom Yamaha Engine Data

Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[CA] [CA11] Axiom Yamaha Engine Data
05-30-19, 10:20 AM (This post was last modified: 05-30-19 10:51 AM by Chuck - Raymarine - Moderator.)
Post: #1
Hairraiser Offline
Junior Member
**
 		Posts: 2
Joined: Oct 2016
Reputation: 0
[CA11] Axiom Yamaha Engine Data
I have two Axiom 9's with the latest Lighthouse Firmware and I want to receive Yamaha engine data from Twin F250s.

My engines use the Yamaha conventional digital gauges and I do not have a CommandLink Hub. I have connected CommandLink to Devicenet cables to both engines. When I connect the engines to my NMEA backbone with the proper T's and Terminators, I can see the Port engine data on the Axioms but not Starboard. This configuration also drops my Fusion radio remotes.

I would like to know if adding the ECI-100 would correct the issue and if I can create a separate NMEA network for the engines connecting to the ECI-100, then connect the ECI-100 to my backbone?

I am attaching a drawing of the current and proposed engine network and the overall network view.


Attached File(s)
.pdf  AxiomEngineData.pdf (Size: 289.58 KB / Downloads: 289)
.pdf  AxiomcompleteNetwork.pdf (Size: 831.57 KB / Downloads: 301)
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
[CA11] Axiom Yamaha Engine Data - Hairraiser - 05-30-19 10:20 AM

Forum Jump:


User(s) browsing this thread: 2 Guest(s)

Contact Us | Raymarine forum | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication