Raymarine forum / Raymarine Forums / Autopilots v / [CA] [CA11] how to connect X10 Smartpilot to Garmin 942xs

Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[CA] [CA11] how to connect X10 Smartpilot to Garmin 942xs
06-04-19, 10:45 AM
Post: #2
Chuck - Raymarine - Moderator Offline
Administrator
*******
 		Posts: 14,319
Joined: Oct 2014
Reputation: 43
RE: [CA11] how to connect X10 Smartpilot to Garmin 942xs
Welcome to the Raymarine Forum Jay,

The most reliable means of connecting Garmin systems to the the SPX autopilots has been to utilize an Actisense NGW-1-ISO NMEA 0183 to NMEA 2000 Data Bridge. The NMEA 0183 leads of the NGW-1-ISO would be interfaced to the corresponding NMEA 0183 terminals of the SPX autopilot. The NMEA 2000 plug of the NGW-1-ISO would then be interfaced to a spur socket within the system's powered and properly terminated NMEA 2000 backbone to which the Garmin products have been interfaced.
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
RE: [CA11] how to connect X10 Smartpilot to Garmin 942xs - Chuck - Raymarine - Moderator - 06-04-19 10:45 AM

Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us | Raymarine forum | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication