European Union (.eu)
United States (.com)
United Kingdom (.co.uk)
Australia (.com.au)
Denmark (.dk)
Finland (.fi)
France (.fr)
Germany (.de)
Italy (.it)
Norway (.no)
Netherlands (.nl)
Spain (.es)
Sweden (.se)
Search
Member List
Calendar
Help
|
[CA] [CA11] CP370 & B744V
|
|
07-09-19, 03:02 PM
(This post was last modified: 07-15-19 01:40 PM by Chuck - Raymarine - Moderator.)
Post: #1
|
|||
|
|||
|
[CA11] CP370 & B744V
Hi
I have an older B744V(2007) connected to a CP370(2017) networked to a E120 display. The fish finder has become sporadic and is now displaying the following. Please see attached photo. This issue was noticed back in 2017 which is when the CP370 was installed to try and eliminate the cause, however the fault persisted and worsened until it became almost un-usable. Although it's set to manual in the photo, manual/auto has been used for frequency and range etc. Get the same behavior. All settings etc have been checked no avail. The LED's on the CP370 indicate correct function with flashing green. All normal fault-finding has been checked and confirmed ok. Any suggestions on next steps please? Thanks. |
|||
|
|
« Next Oldest | Next Newest »
|
| Messages In This Thread |
|
[CA11] CP370 & B744V - PetrelMarine - 07-09-19 03:02 PM
RE: [CA11] CP370 & B744V - Chuck - Raymarine - Moderator - 07-15-19, 02:13 PM
RE: [CA11] CP370 & B744V - PetrelMarine - 07-20-19, 12:21 AM
RE: [CA11] CP370 & B744V - Chuck - Raymarine - Moderator - 07-22-19, 10:34 AM
|
User(s) browsing this thread: 2 Guest(s)