[LW] [LW11] Radar overlay stopped working

[[email protected]]

(07-11-19 08:22 AM)Louise - Raymarine - Moderator Wrote:  Dear [email protected],

Thank you for your post.

Can you confirm the radar is transmitting?

Are you on an Axiom running Lighthouse 3.9.46?

Go into the chart application>menu>settings>layers - underneath layers you will have a toggle switch for radar overlay, this needs to be toggled on and will be green in colour for on.

Many Thanks
Louise

Yes on radar screen I see images

I have latest software installed for Axiom and the new Q2 dome. On the Axiom this software was installed about 2 weeks ago after I reinstalled the latest software on the first Q2 dome. On the new Q2 dome after it was installed earlier this week I checked for updates and it said I had the latest so I did not reinstall them from my SD card

I have a heading and cog showing when I am moving about 8 it’s

The layers screen shows radar, AIS targets and range rings toggled on. On the chart I see Ais boats and the range rings but no radar image. If use app with split screen see chart on left and radar on right with images

Do I maybe need to reinstall the Q2 software for radar and the wired radar adapter when it is connected to the Axiom