The following warnings occurred:
Warning [2] count(): Parameter must be an array or an object that implements Countable - Line: 802 - File: showthread.php PHP 7.4.33 (Linux)
File Line Function
/showthread.php 802 errorHandler->error




Raymarine forum / Raymarine Forums / Autopilots v / [CA] [CA11] ST6001+ Autopilot compatibility

Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[CA] [CA11] ST6001+ Autopilot compatibility
07-16-19, 11:24 AM (This post was last modified: 07-22-19 11:57 AM by Chuck - Raymarine - Moderator.)
Post: #1
twocanoes2 Offline
Junior Member
**
 		Posts: 1
Joined: Jul 2019
Reputation: 0
[CA11] ST6001+ Autopilot compatibility
I currently have a complete Raymarine system on my sailboat (Chartplotter, radar, tridata, wind, autopilot). I am looking at replacing everything but the ST6001+ autopilot with new Garmin equipment (only because I currently have access to a very attractive Garmin discount). I see that the Garmin 7610xsv chartplotter will output NMEA 0183 data and that the ST6001+ autopilot will accept NMEA 0183 input. Am I correct to conclude that I could hook up the new Garmin equipment and the ST6001+ autopilot and have it all play together correctly?
Thanks in advance for the help.
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
[CA11] ST6001+ Autopilot compatibility - twocanoes2 - 07-16-19 11:24 AM

Forum Jump:


User(s) browsing this thread: 2 Guest(s)

Contact Us | Raymarine forum | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication