Raymarine forum / Raymarine Forums / Multifunction Displays v / [CA] [CA11] Axiom 9 problem tracking

Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[CA] [CA11] Axiom 9 problem tracking
07-16-19, 03:17 PM (This post was last modified: 07-16-19 03:18 PM by Chuck - Raymarine - Moderator.)
Post: #2
Chuck - Raymarine - Moderator Offline
Administrator
*******
 		Posts: 14,319
Joined: Oct 2014
Reputation: 43
RE: [CA11] Axiom 9 problem tracking
Welcome to the Raymarine Forum Tleese ,

Please excuse this late response. There were many odd issues related to the LH3 v3.8.x and v3.9.x software, many of which, including reduced sonar sensitivity, were corrected through execution of the Power ON Factory Reset procedure. That said, LH3 v3.10.39 was released today. It is recommended that this software be installed on the system's MFDs and that the Power ON Factory Reset procedure then be executed to correct the reported behavior.
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
RE: [CA11] Axiom 9 problem tracking - Chuck - Raymarine - Moderator - 07-16-19 03:17 PM

Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us | Raymarine forum | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication